Mixing Instructions

Mixing Instructions

Growth Science® has simplified the process of dialing in your nutrient regiment by having the required amount of each product, in each phase of growth, be an an even ratio in relation to the other products. For example, if you look at the required amounts in the bloom cycle the ratio is 1 part Base A, 2 parts Base B, and 1 part Rock Solid®. Therefore, we recommend starting with half the amount listed in your preferred feeding chart, check your EC/ppm level. Then add more nutrients in the proper ratio until you reach your desired EC/ppm.

Growth Science® has simplified the process of dialing in your nutrient regiment by having the required amount of each product, in each phase of growth, be an an even ratio in relation to the other products. For example, if you look at the required amounts in the bloom cycle the ratio is 1 part Base A, 2 parts Base B, and 1 part Rock Solid®. Therefore, we recommend starting with half the amount listed in your preferred feeding chart, check your EC/ppm level. Then add more nutrients in the proper ratio until you reach your desired EC/ppm.

Growth Science® has simplified the process of dialing in your nutrient regiment by having the required amount of each product, in each phase of growth, be an an even ratio in relation to the other products. For example, if you look at the required amounts in the bloom cycle the ratio is 1 part Base A, 2 parts Base B, and 1 part Rock Solid®. Therefore, we recommend starting with half the amount listed in your preferred feeding chart, check your EC/ppm level. Then add more nutrients in the proper ratio until you reach your desired EC/ppm.

DRAIN TO WASTE: SOIL
CLONES & SEEDLINGS 3 ml/gal 3 ml/gal 3 ml/gal
MILD VEGETATIVE 1.25 ml/gal 5 ml/gal 5 ml/gal 5 ml/gal
AGGRESSIVE VEGETATIVE 2.5 ml/gal 6 ml/gal 6 ml/gal 6 ml/gal
TRANSITION 1.25 ml/gal 5 ml/gal 5 ml/gal 5 ml/gal 5 ml/gal
BLOOM 5 ml/gal 10 ml/gal 5 ml/gal
LATE BLOOM 5 ml/gal 10 ml/gal 7.5 ml/gal
DRAIN TO WASTE:
COCO & HYDROPONIC
CLONES & SEEDLINGS 3 ml/gal 3 ml/gal 3 ml/gal
MILD VEGETATIVE 1.25 ml/gal 6 ml/gal 6ml/gal 6 ml/gal
AGGRESSIVE VEGETATIVE 2.5 ml/gal 7 ml/gal 7 ml/gal 7 ml/gal
TRANSITION 1.25 ml/gal 6 ml/gal 6 ml/gal 6 ml/gal 6 ml/gal
BLOOM 7 ml/gal 14 ml/gal 7 ml/gal
LATE BLOOM 7 ml/gal 14 ml/gal 10.5 ml/gal

Drain to Waste Tips

Drain to Waste Tips

  • Mixing instructions: Add the appropriate amount of Strength® to the appropriate amount of water, wait till thoroughly mixed, do the same with Base A, followed by the additional products.

  • Ph the nutrient solution between 5.7 – 6.2 for coco and hydroponics, 6.0 – 6.5 for soil.

  • Keep the nutrient solution between 60° – 75°F (16°- 23°C)

  • Allow for 10-25% runnoff with each watering.

  • Flush with fresh water regularly.

  • For optimum results use filtered or R/O water.

  • In situations where excessive heat or drought are an issue, use 2.5 ml/gallon of strength®.

Drain to Waste Tips

  • Mixing instructions: Add the appropriate amount of Strength® to the appropriate amount of water, wait till thoroughly mixed, do the same with Base A, followed by the additional products.

  • Ph the nutrient solution between 5.7 – 6.2 for coco and hydroponics, 6.0 – 6.5 for soil.

  • Keep the nutrient solution between 60° – 75°F (16°- 23°C)

  • Allow for 10-25% runnoff with each watering.

  • Flush with fresh water regularly.

  • For optimum results use filtered or R/O water.

  • In situations where excessive heat or drought are an issue, use 2.5 ml/gallon of strength®.

RECIRCULATING SYSTEMS
CLONES & SEEDLINGS 3 ml/gal 3 ml/gal 3 ml/gal
MILD VEGETATIVE 2.5 ml/gal 6 ml/gal 6 ml/gal 6 ml/gal
AGGRESSIVE VEGETATIVE 2.5 ml/gal 8 ml/gal 8 ml/gal 8 ml/gal
TRANSITION 2.5 ml/gal 8 ml/gal 8 ml/gal 8 ml/gal 8 ml/gal
BLOOM 8 ml/gal 16 ml/gal 8 ml/gal
LATE BLOOM 8 ml/gal 16 ml/gal 12 ml/gal

Recirculating Tips

Recirculating Tips

  • Mixing instructions: Add the appropriate amount of Strength® to the appropriate amount of water, wait till thoroughly mixed, do the same with Base A, followed by the additional products.

  • Ph the nutrient solution between 5.7 – 6.2

  • Keep the nutrient solution between 60° – 75°F (16°- 23°C)

  • Change the nutrient solution every 7 days and top off with fresh water between nutrient changes. If EC/ ppm drops too much between changes, add more nutrients.

  • For optimum results use filtered or R/O water.

Recirculating Tips

  • Mixing instructions: Add the appropriate amount of Strength® to the appropriate amount of water, wait till thoroughly mixed, do the same with Base A, followed by the additional products.

  • Ph the nutrient solution between 5.7 – 6.2

  • Keep the nutrient solution between 60° – 75°F (16°- 23°C)

  • Change the nutrient solution every 7 days and top off with fresh water between nutrient changes. If EC/ ppm drops too much between changes, add more nutrients.

  • For optimum results use filtered or R/O water.

Growth Science® Nutrients Inc. • 269 Mt Hermon Rd. Ste. 204 • Scotts Valley, CA 95066

© Growth Science® Nutrients. All Rights Reserved.